• SSD SPLIT COOLING SYSTEM – ceiling mounted design
• SSD cooling systems consist of a remote condensing unit and an evaporator unit and they are connected by a liquid line and an insulated suction line.
• SSD evaporator units can be installed on the ceiling in the center of a wine room.
• SSD evaporator units have a special coil coating and provide two-way air supply for better operation.
• SSD condensing units can be located away from the wine cellar up to 75 ft so that noise and compressor vibrations are isolated.
• TEMPERATURE: The WM-12000SSD cooling unit is designed and used to provide a stable temperature between 50~65°F for a properly insulated and sized space.
• The ambient temperature range for cellar should not exceed the temperature of the cellar by more than 25°F. Cellar walls should not receive direct sun or strong wind. Lighting should be low wattage and installed on a timer to ensure that lights are not left on when the cellar is unoccupied.
• HUMIDITY CONTROL: The refrigerated space will maintain humidity within the range of 50~75% RH. Use a separate hygrometer to monitor the humidity.
• DISPLAY: Digital display with easy push-button controls
• NOTIFICATIONS: Display notifications provide alerts help to protect your wine cellar and alert you when maintenance is required.
• CONTROL PANEL: Control panel includes digital display, manual defrost button, up and down arrows to adjust temperature as well as browse parameters, power button, and SET button.
• Outdoor enclosure is included with condensing unit
• This unit can be configured for use with 220V outlets. Please call 1-800-777-8466 for more details.
• WARRANTY: 1 year warranty on parts, 1 year labor.
• NOTE: Split systems must be installed by a certified refrigeration technician. Purchase does not include the copper tubing.

AVAILABLE OPTIONS and CONFIGURATIONS:

• Optional Low Ambient Kit: Recommended for applications where the low ambient temperatures in the condensing unit mounting area will be below 50°F. Feature is factory-installed.
• Temperature Control Panel with Heating Function: Works in conjunction with your home's air forced electric heater to ensure that your cellar never goes below the programmed temperature.
• Add the Wine Bottle Probe to receive the most accurate reading of your wine's temperature. The Wine Bottle Probe measures the temperature of the liquid inside the bottle to ensure your wine is kept at the ideal temperature and plugs directly into your cellar cooling system. You will have the following advantages of using a bottle probe.
  1) Air temperature in the cabinet may fluctuate, but the wine temperature in the bottle is constant.
  2) You can put a cooling unit in a full wine cabinet and show both the air temperature and bottle temperature.
• Our new digital controller provides 3 connections. One of them can be used as bottle probe, the other can be used for the alarm. Both bottle probe and alarm feature can be available at the same time.
• Please call us at 1-800-777-8466 to order this unit with any of the above mentioned options or non-standard configurations.

SPECS & RESOURCES

• EVAPORATOR UNIT DIMENSIONS: 29-7/8"W x 21"D x 17”H
• EVAPORATOR UNIT WEIGHT: 70 lbs
• Evaporator Unit is ETL & NSF certified
• CONDENSING UNIT DIMENSIONS: 26”W x 22”D x 18"H
• CONDENSING UNIT WEIGHT: 135 lbs
• ELECTRICAL REQUIREMENTS: Evaporator Unit 115V 60Hz 5A, Condensing Unit 230V 60Hz 15A. The power cord must be plugged into a 3-prong grounding-type wall receptacle, grounded in accordance with the National Electrical Code, ANSI/NFPA 70 – latest edition and local codes and ordinances.
• COVERAGE SIZE: 3300 Cubic Feet
• CFM: 1140
• BTU/h: 12000

• Owner's Manual (PDF)
• Spec Sheet (PDF)